We know that quality matters, so here at INUI we are constantly working with our designers as well as our engineers to improve our products whenever we can. With our LED IP68 marine grade floodlights and streetlight we have made some fantastic improvements by using the high output Bridgelux LED chip. By doing this we have been successful in lowering the wattage by almost 50% to achieve the same Lumen output. What this means is, where before you would have had to install a 150-watt Marine grade floodlight or streetlight, you can now install a 100-watt and get the same results. This means that your energy consumption is reduced by yet a further 50% as well as your CO2 levels.
All of our IP68 Marine Grade flood lights or streetlights are made to order due to the very stringent testing that is involved for this top end quality product, this means we do not carry this item in stock, these are special made to order items only. The standard Marine Grade flood lights are for Coastal areas on land only. For applications out at sea then the Modular Marine Grade flood light with the PVDF coating is recommended. If the standard Marine grade flood light is going to be used out at sea on ships for example then they will require still further sea paint coating on top of the original paint. Our range of Marine Sea Flood lights are suitable for use at sea due to their aluminium construction, but please do bear in mind we ONLY warranty this MSF light to 1.5M for a maximum of 30 minutes, they will also require the normal regular maintenance that you would expect to prevent a build of salt water residue. A simple spray down and brush of the fittings with fresh water each time the vessel is cleaned would be sufficient. Here at INUI we have proved yet again that we are consistently working to bring you the very best LED products for the UK market.